How fast does mold grow after a water leak, and what to do first

There is no exact clock, but the EPA and CDC both point to drying within 24 to 48 hours.

Published by Emily, Project Coordinator at MLE Construction

Short answer

Mold needs moisture, and the EPA says wet items must be dried quickly, within 24 to 48 hours, to avoid mold growth. That window is the drying target, not an exact start time for mold. So stop the water source, dry everything fast, and call a professional if the damage is large or the water was contaminated.

Open living and dining room with pendant lights and wood floors

How fast does mold grow after a leak?

There is no exact clock, but speed matters. The EPA says mold can grow on virtually any organic material as long as moisture and oxygen are present, and that wet items must dry within 24 to 48 hours to avoid mold growth. The CDC gives the same window for cleaning up and drying out a home after a flood.

The CDC says mold grows where there is moisture, such as around leaks in roofs, windows or pipes. It names paper, cardboard, ceiling tiles and wood as materials where mold grows.

What should I do first after a water leak?

Fix the water source, then dry everything. The EPA says to fix plumbing leaks and other water problems as soon as possible and dry all items completely. It adds that more air circulation and a higher temperature speed up drying.

The EPA also warns that if you clean up mold but leave the water source in place, the mold will likely return.

Related guide: Does homeowners insurance cover water damage in California?

When is it more than a do-it-yourself cleanup?

It is time for a professional when mold covers more than about 10 square feet, or when there has been a lot of water damage. The EPA says small patches of less than about 10 square feet can often be handled by the homeowner. It also says to call in a professional when the water came from sewage or other contaminated water.

If you hire someone, the EPA advises making sure the contractor has experience cleaning up mold.

Is mold a health risk?

It can be. The CDC says mold exposure may cause nasal congestion, sore throat, coughing, wheezing, irritated eyes or skin rashes, or no effects at all. People with asthma or mold allergies may have severe reactions, and people with weakened immune systems or chronic lung disease may get lung infections from mold. This article is not medical advice, so ask a health professional about symptoms.

Where does hidden mold grow after a water leak?

Hidden mold usually grows inside or behind things that stay damp. The EPA lists the back of drywall, paneling and wallpaper, the underside of carpet and carpet pads, the top of ceiling tiles, and the inside of walls around leaking pipes. It also names cold corners behind furniture, where condensation forms, and ductwork.

The EPA says to suspect hidden mold when a building smells musty but you cannot see the source, or when there is known water damage and people report health problems. It adds that disturbing these spots can release many spores, so it recommends an experienced professional. The EPA also lists roof materials above ceiling tiles and porous liners inside ductwork. It also lists humid crawl spaces and standing water under plastic sheeting as trouble spots.

How do I clean mold from hard surfaces and soft materials?

Hard surfaces can be scrubbed and dried, but soft materials often have to be thrown out. The EPA says to scrub hard surfaces with detergent and water and dry them completely. It says porous items such as ceiling tiles and carpet may need to be thrown away, because mold can be hard or impossible to remove from them.

The EPA says not to paint or caulk over mold, since paint on a moldy surface is likely to peel. For protection, it recommends a properly fitted N-95 respirator, long gloves, and goggles without ventilation holes. The CDC lists rubber boots, rubber gloves and goggles. The EPA says to avoid touching mold with bare hands.

Should I use bleach to kill mold?

The EPA says bleach is not recommended as a routine part of mold cleanup. It says killing mold is usually not possible or needed, because leftover spores will not grow if the moisture problem is fixed. It also says dead mold can still cause allergic reactions, so it must be removed.

The CDC says hard surfaces can be cleaned with soap and water or with a bleach solution of no more than 1 cup of household laundry bleach in 1 gallon of water. Both agencies warn never to mix bleach with ammonia or other cleaners, because it makes a poisonous gas. Open windows for fresh air while you work, and follow the maker's directions on any cleaner. The EPA adds that if you use a disinfectant, you should ventilate the area and send the air outdoors.

What humidity level helps keep mold away?

The EPA says to keep indoor relative humidity below 60 percent, and ideally between 30 and 50 percent. It says a hygrometer, which measures humidity, is a low-cost way to check, and that a combined temperature and humidity meter costs less than $50.

The EPA suggests running an air conditioner or dehumidifier when needed. It also says to use the bathroom fan or open a window when showering, and to vent clothes dryers outdoors. Mopping and carpet shampooing can raise humidity sharply when the HVAC system is off. The EPA also advises insulating cold surfaces, such as cold water pipes, to cut condensation. It explains that condensation forms when warm, humid air meets a cold surface, such as a duct with no insulation.

Do I need to get my home tested for mold?

Usually not. The CDC says it does not recommend mold testing. It explains that results cannot show whether a person will get sick, that good sampling can be costly, and that there are no set standards for an acceptable amount of mold in a home. The CDC says any mold you see or smell should be removed, whatever the type.

The EPA agrees that sampling is usually not needed when mold is visible. It says no federal limits for mold exist, so a test cannot show compliance. It says surface sampling may help confirm that a cleanup worked, and should be done by experienced professionals. Ask a health professional about any symptoms. The CDC also says you should fix the moisture problem, or the mold will likely return.

When should I call a contractor?

Call one when materials stay wet, when mold covers a large area, or when walls, floors or ceilings need to be opened and repaired. MLE Construction is a licensed general contractor (CSLB #1066995) in Tarzana that repairs and rebuilds water-damaged areas, and gives a detailed scope of work after an on-site visit.

Next step: see our mold remediation page, browse all restoration services, or contact us for a free estimate.

Common questions

Can I clean mold myself with bleach?

Bleach alone is not a reliable fix. Mold grows where moisture persists, and porous materials like drywall usually have to be removed instead of cleaned. If the moisture source is not repaired, the mold is likely to return.

What are signs that I need a mold inspection?

Musty smells, visible spotting, peeling paint and past leaks are common signs. Moisture stains on ceilings or walls also matter. If you see any of these, an inspection can show whether mold is present and where the moisture comes from.

How do I know if water damage is hidden?

Water can stay in walls, subfloors and insulation without showing on the surface. Signs include soft or stained drywall, musty smells and warped flooring. A moisture meter inspection shows where materials are still wet, even behind finished surfaces.

Do you offer free estimates?

Yes. Call (800) 209-2779 or send the form and we will schedule a visit and give you a detailed scope of work.

Related guides

Tell us about your project

Call or send the form. We will schedule a visit and give you a detailed scope of work.

Call Now(800) 209-2779
  • CSLB License #1066995
  • BBB Accredited Business
  • Detailed scope of work before we start