Brace and Bolt Retrofit in Los Angeles, CA

MLE Construction does brace and bolt retrofits on older Los Angeles houses with raised foundations. The work bolts the house to its foundation and braces the short walls in the crawl space. Call (800) 209-2779 to schedule a free estimate.

Updated

5.0 on Google
MLE Construction crew member fastening a steel plate to a concrete foundation wall
Serving Los Angeles from our Tarzana office
CSLB License#1066995
Detailed scope of workBefore work starts on your property

Get a free estimate for a brace and bolt retrofit

Leave your number and we will call you back to schedule a visit.

Licensed general contractorCSLB #1066995BBB AccreditedOne project manager per jobFree estimatesPermits handledServing Los Angeles and the ValleyBased in Tarzana

Key facts

Brace and bolt retrofit in Los Angeles at a glance.

Service
Brace and bolt retrofit
Area
Los Angeles, the San Fernando Valley, the Westside and the Conejo Valley
Contractor
MLE Construction, CSLB License #1066995
Office
18455 Burbank Blvd, Suite 205, Tarzana

What is included in a brace and bolt retrofit?

A brace and bolt retrofit anchors a wood-frame house to its foundation with bolts and stiffens the short cripple walls under the floor with plywood. It is the retrofit type used by California's Earthquake Brace + Bolt (EBB) program, which the program says is for wood-framed homes built before 1980 on a raised foundation. The program requires the water heater to be strapped and braced as part of the retrofit. Grant amounts and registration dates are set by the program, so confirm them on its website.

Request a free estimate

How does a brace and bolt retrofit work?

It works in five steps, from the first visit to the final walkthrough.

Two MLE Construction crew members fastening steel plates to a concrete foundation wall
Foundation and Structural
  1. Step 1

    Inspection

    A project manager visits the home, examines the foundation and surrounding soil, and notes visible damage and its likely causes.

  2. Step 2

    Scope of work

    MLE Construction provides a free estimate with the full scope of work before anything starts.

  3. Step 3

    Plans and permit

    When the work needs it, a licensed structural engineer prepares the plans and MLE Construction handles the permit.

  4. Step 4

    Construction

    One project manager runs the crew and coordinates any city inspections from the first step to the last.

  5. Step 5

    Final walkthrough

    The project manager walks the finished work with you and checks it against the agreed scope.

How much does a brace and bolt retrofit cost in Los Angeles?

Four things set the price, and they are listed here. After an on-site visit you get a free estimate that shows the scope and the price before any work starts.

Request a free estimate

Who handles the permits?

Some jobs need a building permit and some do not. It depends on the scope of the work. In the City of Los Angeles permits go through the Los Angeles Department of Building and Safety (LADBS), and other cities have their own building departments. When a job needs a permit, MLE prepares the plans and gets it before work starts.

Permit office
LADBS in Los Angeles, or your city
Plans and paperwork
Prepared and submitted by MLE

MLE handles the permit.

What happens at the first visit?

A project manager looks at the property, takes measurements and photos, and asks what you want done. You then get a detailed scope of work before anything starts on your property.

The visit
On site, at your property
The estimate
Written, before work starts

You approve the scope before work starts.

“… with MLE construction we felt a sense of honesty and knowledge from the first meeting.”

Yosep B., Google review

Common questions about brace and bolt retrofit

Which houses does a brace and bolt retrofit apply to?

It applies to older wood-frame houses on raised foundations. The Earthquake Brace + Bolt program says its retrofit is only done on wood-framed homes built before 1980 with a raised foundation. An inspection confirms what your house has.

Is there grant money for a brace and bolt retrofit?

The Earthquake Brace + Bolt program offers grants toward qualifying retrofits and opens registration for a limited time each year. Amounts and rules are set by the program and can change, so check its website for the current details.

Does a brace and bolt retrofit need a permit?

Yes. The program says you or your contractor must get a permit from the local building department before the retrofit begins. MLE Construction prepares the plans and handles the permit.

Do you offer free estimates?

Yes. Call (800) 209-2779 or send the form and we will schedule a visit and give you a detailed scope of work.

What areas do you serve?

We are based in Tarzana and work across the San Fernando Valley, the Westside and the Conejo Valley, including Encino, Woodland Hills, Sherman Oaks, Calabasas, Beverly Hills, Santa Monica, Malibu, Pacific Palisades, Thousand Oaks and Pasadena.

Get a free estimate for a brace and bolt retrofit

Tell us about the job and we will call you back to schedule a visit.

Call Now(800) 209-2779
  • CSLB License #1066995
  • BBB Accredited Business
  • Detailed scope of work before we start