Slab Replacement in Los Angeles, CA

MLE Construction removes and replaces damaged concrete slabs at Los Angeles homes. When a slab is too cracked, sunken or broken up to repair, we take it out and pour a new one. Call (800) 209-2779 to schedule a free estimate.

Updated

5.0 on Google
Open living and dining room with pendant lights and wood floors
Serving Los Angeles from our Tarzana office
CSLB License#1066995
Detailed scope of workBefore work starts on your property

Get a free estimate for slab replacement

Leave your number and we will call you back to schedule a visit.

Licensed general contractorCSLB #1066995BBB AccreditedOne project manager per jobFree estimatesPermits handledServing Los Angeles and the ValleyBased in Tarzana

Key facts

Slab replacement in Los Angeles at a glance.

Service
Slab replacement
Area
Los Angeles, the San Fernando Valley, the Westside and the Conejo Valley
Contractor
MLE Construction, CSLB License #1066995
Office
18455 Burbank Blvd, Suite 205, Tarzana

What is included in slab replacement?

Slab replacement means breaking out an existing concrete slab, preparing the ground under it, and pouring new reinforced concrete. It applies to slab foundations, garage floors and other structural slabs that have failed beyond what a repair can fix. The base is compacted and reinforcing steel is placed before the pour. For a house foundation slab, a licensed structural engineer sets the design.

Request a free estimate

How does slab replacement work?

It works in five steps, from the first visit to the final walkthrough.

Two MLE Construction crew members fastening steel plates to a concrete foundation wall
Foundation and Structural
  1. Step 1

    Inspection

    A project manager visits the home, examines the foundation and surrounding soil, and notes visible damage and its likely causes.

  2. Step 2

    Scope of work

    MLE Construction provides a free estimate with the full scope of work before anything starts.

  3. Step 3

    Plans and permit

    When the work needs it, a licensed structural engineer prepares the plans and MLE Construction handles the permit.

  4. Step 4

    Construction

    One project manager runs the crew and coordinates any city inspections from the first step to the last.

  5. Step 5

    Final walkthrough

    The project manager walks the finished work with you and checks it against the agreed scope.

How much does slab replacement cost in Los Angeles?

Four things set the price, and they are listed here. After an on-site visit you get a free estimate that shows the scope and the price before any work starts.

Request a free estimate

Who handles the permits?

Some jobs need a building permit and some do not. It depends on the scope of the work. In the City of Los Angeles permits go through the Los Angeles Department of Building and Safety (LADBS), and other cities have their own building departments. When a job needs a permit, MLE prepares the plans and gets it before work starts.

Permit office
LADBS in Los Angeles, or your city
Plans and paperwork
Prepared and submitted by MLE

MLE handles the permit.

What happens at the first visit?

A project manager looks at the property, takes measurements and photos, and asks what you want done. You then get a detailed scope of work before anything starts on your property.

The visit
On site, at your property
The estimate
Written, before work starts

You approve the scope before work starts.

“I called a few companies right away and MLE was the first to arrive …”

Michael A., Google review

Common questions about slab replacement

When is a slab replaced instead of repaired?

Replacement is considered when cracking, sinking or breakup is widespread, or when the ground under the slab has failed. If the damage is limited, slab repair is usually the first option, and the inspection tells you which applies.

What happens to plumbing under the slab?

Pipes under the slab are located before demolition, and any that are damaged can be repaired while the slab is open. Your project manager goes over this before work starts.

How long before the new slab can be used?

Concrete needs time to cure before it carries full loads, and the time depends on the mix and the use. Your project manager gives you the schedule for your slab before the pour.

Do you offer free estimates?

Yes. Call (800) 209-2779 or send the form and we will schedule a visit and give you a detailed scope of work.

What areas do you serve?

We are based in Tarzana and work across the San Fernando Valley, the Westside and the Conejo Valley, including Encino, Woodland Hills, Sherman Oaks, Calabasas, Beverly Hills, Santa Monica, Malibu, Pacific Palisades, Thousand Oaks and Pasadena.

Get a free estimate for slab replacement

Tell us about the job and we will call you back to schedule a visit.

Call Now(800) 209-2779
  • CSLB License #1066995
  • BBB Accredited Business
  • Detailed scope of work before we start